111
Printer Configuration and Adjustment
Adjust Printer Settings
6/28/17 ZT510 User Guide P1095460-001
SETTINGS > PRINT METHOD
Specify if the printer needs to use ribbon for printing.
SETTINGS
—
DARKNESS
—
PRINT SPEED
—
MEDIA TYPE
—
PRINT METHOD
—
TEAR OFF
—
PRINT WIDTH
—
PRINT MODE
—
LABEL TOP
—
LEFT POSITION
—
REPRINT MODE
—
LABEL LENGTH MAX
—
LANGUAGE
Accepted values: • THERMAL TRANS—Uses ribbon and thermal transfer media.
• DIRECT THERMAL—Uses direct thermal media and no ribbon.
Related ZPL command(s):
^MT
SGD command used:
ezpl.print_method
Printer web page: View and Modify Printer Settings > Media Setup > Print Method
To Next Page
Loading...