Zebra ZT510 - Navigating through Screens in the Standard Display

19
Introduction
Standard Control Panel
6/28/17 ZT510 User Guide P1095460-001
Navigating through Screens in the Standard Display
Table 1 shows the following:
• the options available for navigating through the screens in the control panel display
• how to select or modify things shown on the display
Table 1 • Navigation
Idle Display
At the Idle Display (Figure 5 on page 21), press LEFT SELECT to go to
the printer’s Home menu (Figure 6 on page 21).
Home Menu
To move from icon to icon in the
Home menu, press any of the
ARROW buttons.
When an icon is selected, its
colors are reversed to highlight it.
To select the highlighted menu
icon and enter the menu, press
OK.
Press
LEFT SELECT to exit the
Home menu and return to the Idle
Display. The printer automatically
returns to the Idle Display after
15 seconds of inactivity in the
Home menu.
SETTINGS menu icon
SETTINGS menu icon
highlighted