Printer Configuration and Adjustment
Adjust Printer Settings
108
P1095460-001 ZT510 User Guide 6/28/17
SETTINGS > DARKNESS
Set the print darkness to the lowest setting that provides good print quality. If you set the
darkness too high, the label image may print unclearly, barcodes may not scan correctly, the
ribbon may burn through, or the printhead may wear prematurely.
If desired, use the Optimal Darkness and Speed Test on page 225 to determine the best
darkness setting.
SETTINGS
—
DARKNESS
—
PRINT SPEED
—
MEDIA TYPE
—
PRINT METHOD
—
TEAR OFF
—
PRINT WIDTH
—
PRINT MODE
—
LABEL TOP
—
LEFT POSITION
—
REPRINT MODE
—
LABEL LENGTH MAX
—
LANGUAGE
Accepted values: 0.0 to 30.0
Related ZPL command(s): ^MD, ~SD
SGD command used:
print.tone
Printer web page: View and Modify Printer Settings > General Setup > Darkness
To Next Page
Loading...