Zebra ZT510 - Peel-Off Mode or Applicator Mode

41
Printer Setup and Operation
Load the Media—Peel-Off Mode or Applicator Mode
6/28/17 ZT510 User Guide P1095460-001
Peel-Off Mode or Applicator Mode
1. If you have not already done so, follow the instructions in the section Insert the Media into
the Printer on page 32.
2. If necessary, install the rewind/liner take-up plate in the peel-off position as shown. See
Install the Rewind/Liner Take-Up Plate on page 192 for instructions.