Zebra ZT510 - COPY USB FILE TO E:

Printer Configuration and Adjustment
Adjust Printer Settings
134
P1095460-001 ZT510 User Guide 6/28/17
TOOLS > COPY USB FILE TO E:
Select files to copy to the printer from a USB Flash drive. See the exercises in Using a USB
Host Port and the NFC Capabilities on page 247 for an exercise using this capability.
To copy files to the printer from a USB Flash drive:
1. Insert a USB Flash drive into the printer’s USB host port (available as an option).
The printer lists available files.
SELECT ALL is available to copy all available files from
the USB Flash drive.
2. Use the UP ARROW or DOWN ARROW to select a file from this menu.
3. Press RIGHT SELECT to select STORE.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ENERGY STAR
—
CONFIG INFO TO USB
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
PRINT TEST FORMAT
* This menu item can be used only if a USB Flash drive is inserted into
an optional USB host port on the printer.
SGD command used: usb.host.read_list