165
Printer Configuration and Adjustment
Adjust Printer Settings
6/28/17 ZT510 User Guide P1095460-001
SENSORS > SENSOR TYPE
Select the media sensor that is appropriate for the media that you are using. The reflective
sensor typically is used only for black mark media. The transmissive sensor typically is used
for other media types.
SENSORS
—
SENSOR TYPE
—
MEDIA/RIBBON CAL
—
PRINT INFORMATION
—
LABEL SENSOR
—
TAKE LABEL
Accepted values: • TRANSMISSIVE
• REFLECTIVE
Related ZPL command(s):
^JS
SGD command used:
device.sensor_select
Printer web page: View and Modify Printer Settings > Media Setup
To Next Page
Loading...