Printer Configuration and Adjustment
Install the Rewind/Liner Take-Up Plate
192
P1095460-001 ZT510 User Guide 6/28/17
Install the Rewind/Liner Take-Up Plate
The rewind/liner take-up plate is used in different positions for Rewind mode versus Peel
mode or Applicator Mode.
Peel Mode/Applicator Mode
To install the rewind/liner take-up plate for Peel mode or Applicator mode:
1. Loosen the two knurled nuts on the outside stud on the printer’s base.
To Next Page
Loading...