Zebra ZT510 - CONFIG INFO TO USB

129
Printer Configuration and Adjustment
Adjust Printer Settings
6/28/17 ZT510 User Guide P1095460-001
TOOLS > CONFIG INFO TO USB
Use this function to copy the printer’s configuration information to a USB mass storage
device, such as a USB Flash drive, that is plugged into a USB host port option. This makes the
information accessible without having to print physical labels. To print the information to
labels, see PRINT INFORMATION on page 119.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ENERGY STAR
—
CONFIG INFO TO USB
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
PRINT TEST FORMAT
* This menu item can be used only if a USB Flash drive is inserted into
an optional USB host port on the printer.
Related ZPL command(s): ^HH—Returns the printer configuration information returned to the host
computer.
Printer web page: Printer Home Page > View Printer Configuration
(to view printer configuration information on your web browser)
View and Modify Printer Settings > Print Listings on Label
(to print the configuration information on labels)