Zebra ZT510 - General Specifications

Specifications
General Specifications
262
P1095460-001 ZT510 User Guide 6/28/17
General Specifications
Height 15.58 in. (395.68 mm)
Width 10.56 in. (268.2 mm)
Depth 20.17 in. (512.3 mm)
Weight 50 lb (22.7 kg)
Temperature Operating Thermal Transfer: 40° to 104°F (5° to 40°C)
Direct Thermal: 32° to 104°F (0° to 40°C)
Storage –22° to 140°F (–30° to 60°C)
Relative
Humidity
Operating 20% to 85%, non-condensing
Storage 20% to 85%, non-condensing
Communication
Interface
Specifications
Standard Bluetooth
®
LE
Limitations and Requirements
Many mobile devices can communicate with the printer within a
30-foot radius of the printer.
Connections and Configuration
Refer to the Zebra Bluetooth User Guide for specific
instructions for configuring your printer to use a Bluetooth
interface. A copy of this manual is available at
http://www.zebra.com/manuals.
Zebra PrintTouch/Near Field Communication (NFC)
See Using a USB Host Port and the NFC Capabilities on page 247
for more information.
Limitations and Requirements
NFC communication must be initiated by touching your device
to the appropriate location on the printer.
Connections and Configuration
Some devices may not support NFC communication with the
printer until you alter their settings.
USB 2.0 Data Interface
Limitations and Requirements
• Maximum cable length of 16.4 ft (5 m).
Connections and Configuration
No additional configuration is necessary.
(Continued on next page.)