Printer Configuration and Adjustment
Adjust Printer Settings
128
P1095460-001 ZT510 User Guide 6/28/17
TOOLS > ENERGY STAR
When Energy Star mode is enabled, the printer goes into a “sleep” mode after a timeout
period, thereby lowering power consumption. Press any button on the control panel to bring
the printer back to an active state.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ENERGY STAR
—
CONFIG INFO TO USB
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
PRINT TEST FORMAT
Accepted values: • ON
• OFF
SGD command used:
power.energy_star.enable
power.energy_star_timeout
(to set the amount of idle time before Energy Star is invoked)
To Next Page