Specifications
Ribbon Specifications
270
P1095460-001 ZT510 User Guide 6/28/17
Ribbon Specifications
Standard printers use ribbon that is coated on the outside. An optional ribbon spindle is
available to use ribbon that is coated on the inside. Contact your authorized Zebra reseller for
ordering information.
Ribbon width MINIMUM* 2.0 in. (51 mm)
Ribbon width MAXIMUM 4.33 in. (110 mm)
Ribbon length MAXIUMUM 1476 ft (450 m)
Ribbon core inside diameter 1 in. (25 mm)
Ribbon roll outside diameter MAXIMUM 3.2 in. (81.3 mm)
* Zebra recommends using ribbon that is at least as wide as the media to protect the printhead from wear.
** Depending on your application, you may be able to use ribbon narrower than 2 in. (51 mm), as long as
the ribbon is wider than the media being used. To use a narrower ribbon, test the ribbon’s performance
with your media to assure that you get the desired results.
To Next Page
Loading...