Zebra ZT510 - HOST HANDSHAKE

171
Printer Configuration and Adjustment
Adjust Printer Settings
6/28/17 ZT510 User Guide P1095460-001
PORTS > HOST HANDSHAKE
Select the handshake protocol that matches the one being used by the host computer.
PORTS
—
BAUD RATE
—
DATA BITS
—
PARITY
—
HOST HANDSHAKE
—
WML
Accepted values: • XON/XOFF
• RTS/CTS
• DSR/DTR
Related ZPL command(s):
^SC
SGD command used:
comm.handshake
Printer web page: View and Modify Printer Settings > Serial Communications Setup