185
Printer Configuration and Adjustment
Adjust the Printhead Pressure and Toggle Position
6/28/17 ZT510 User Guide P1095460-001
Adjust the Printhead Pressure and Toggle Position
The printhead pressure toggles (Figure 17) can be adjusted to create more or less pressure, as
needed. They can also be moved from side to side to adjust the pressure in certain areas. Use
the lowest printhead pressure necessary to produce good print quality. Higher pressures may
cause premature wear on the printhead elements.
If the toggles are not positioned correctly or adjusted to apply the correct pressure, the
following types of issues may result:
• media and ribbon may slip
• ribbon may wrinkle
• media may move from side to side during printing
• printing may be too light or too dark on one side of the media
Figure 17 • Printhead Pressure Toggles
1
Inside toggle
2
Outside toggle
To Next Page
Loading...