Printer Setup and Operation
Install the Printer Driver and Connect the Printer to the Computer—Ethernet
88
P1095460-001 ZT510 User Guide 6/28/17
Connect to Your Network through the Printer’s Ethernet Port
If you wish to use a wired print server (Ethernet) connection, you may need to connect the
printer to your computer using one of the other available connections. While the printer is
connected via one of those connections, you would configure the printer to communicate with
your Local Area Network (LAN) through the printer’s wired print server.
For additional information about Zebra print servers, refer to the ZebraNet
Wired and Wireless Print Server User Guide. To download the latest version
of this guide, go to http://www.zebra.com/zt500-info.
To connect the printer to your computer by a wired print server, complete these
steps:
1. Install Zebra Setup Utilities as instructed in Install Zebra Setup Utilities on page 67.
2. Plug the female end of the A/C power cord into the A/C power connector on the back of
the printer.
3. Plug the male end of the A/C power cord into an appropriate power outlet.
To Next Page
Loading...