Printer Configuration and Adjustment
Adjust Printer Settings
110
P1095460-001 ZT510 User Guide 6/28/17
SETTINGS > MEDIA TYPE
Select the type of media that you are using.
SETTINGS
—
DARKNESS
—
PRINT SPEED
—
MEDIA TYPE
—
PRINT METHOD
—
TEAR OFF
—
PRINT WIDTH
—
PRINT MODE
—
LABEL TOP
—
LEFT POSITION
—
REPRINT MODE
—
LABEL LENGTH MAX
—
LANGUAGE
Accepted values: • CONTINUOUS
• GAP/NOTCH
• MARK
If you select
CONTINUOUS, you must include a label length in your label
format (
^LL if you are using ZPL). If you select GAP/NOTCH or MARK for
various noncontinuous media, the printer feeds media to calculate the label
length.
See Types of Media on page 22 for more information.
Related ZPL command(s):
^MN
SGD command used:
ezpl.media_type
Printer web page: View and Modify Printer Settings > Media Setup > Media Type
To Next Page
Loading...