269
Specifications
Media Specifications
6/28/17 ZT510 User Guide P1095460-001
Media Specifications
Label length MINIMUM Tear-off 0.7 in. (18 mm)
Rewind 0.25 in (6 mm)
Peel-off 0.5 in (13 mm)
Cutter 1.5 in. (38 mm)
Label length MAXIMUM
(non-continuous media)
39 in. (991 mm)
Print length MAXIMUM
(continuous media)
200 dpi 150 in. (3810 mm)
300 dpi 100 in. (2540 mm)
Label width MINIMUM 0.79 in. (20 mm)
Label width MAXIMUM (label and liner) 4.5 in. (114 mm)
Total thickness MINIMUM (includes liner, if any) 0.003 in. (0.076 mm)
Total thickness MAXIMUM
(includes liner, if any)
Cutter 0.009 in. (0.23 mm)
Other 0.012 in. (0.30 mm)
Roll outside diameter MAXIMUM 8 in. (203 mm)
on a 3-in. (76-mm) inside
diameter core
Inter-label gap Minimum 0.079 in. (2 mm)
Preferred 0.118 in. (3 mm)
Maximum 0.157 in. (4 mm)
Ticket/tag notch size (width x length) 0.25 in. x 0.12 in. (6 mm x 3
mm)
Sensing hole diameter 0.125 in. (3 mm)
Black mark density, in Optical Density Units (ODU) > 1.0 ODU
Media density MAXIMUM (black mark) 0.5 ODU
Black mark length (parallel to inside media edge) 0.12 to 0.43 in. (3 to 11 mm)
Black mark width (perpendicular to inside media edge) > 0.43 in. (> 11 mm)
Black mark location within 0.040 in. (1 mm)
of inside media edge
To Next Page
Loading...