Zebra ZT510 - Page 244

Diagnostics and Troubleshooting
Troubleshooting—Miscellaneous Issues
244
P1095460-001 ZT510 User Guide 6/28/17
IP Address Changing
Issue Possible Cause Recommended Solution
My printer reassigns a
new IP address to the
print server after the
printer has been off for
a while.
The settings for your network
are causing the network to
reassign a new IP address.
If the printer changing IP addresses causes issues
for you, follow these steps to assign it a static IP
address:
1. Find out what values need to be assigned to
the IP address, subnet mask, and gateway for
your print server (wired, wireless, or both).
2. Change the appropriate IP protocol value to
PERMANENT. See WIRED IP PROTOCOL
on page 144 or WLAN IP PROTOCOL
on page 149.
3. Change the values for the IP address, subnet
mask, and gateway for the appropriate print
server to what you want them to remain.
Wired:
WIRED IP ADDRESS on page 141
WIRED SUBNET MASK on page 142
WIRED GATEWAY on page 143
Wireless:
WLAN IP ADDRESS on page 146
WLAN SUBNET MASK on page 147
WLAN GATEWAY on page 148
4. Reset the network using RESET NETWORK
on page 156 to save the changes.