33
Printer Setup and Operation
Load the Media
6/28/17 ZT510 User Guide P1095460-001
2. Remove and discard any tags or labels that are torn or dirty or that are held by adhesives or
tape.
3. Insert roll or fanfold media into the printer.
Roll Media
Fanfold Media
a. Pull out the media supply guide as far as it
goes.
a. Fanfold media can be stored behind or under
the printer. Depending on where the media is
stored, feed the media from behind or through
the bottom access slot.
b. Place the roll of media on the media supply
hanger. Push the roll back as far as it will go.
To Next Page
Loading...