Printer Setup and Operation
Load the Media—Peel-Off Mode or Applicator Mode
46
P1095460-001 ZT510 User Guide 6/28/17
11. Remove the hook from the rewind spindle.
12. Wind the liner around the rewind spindle as shown. Rotate the rewind spindle several
turns to tighten the liner and remove any slack.
13. Reinstall the spindle hook over the liner. Insert the long end of the hook into the small hole
on the guide plate (
1). Insert the short end of the hook into the hole in the center of the
adjusting nut (
2).
To Next Page
Loading...