Printer Setup and Operation
Load the Ribbon
64
P1095460-001 ZT510 User Guide 6/28/17
5. A ribbon leader makes ribbon loading and unloading easier. Does your roll of ribbon have
paper or something else attached to the end to serve as a ribbon leader?
If… Then…
Yes Continue with the next step.
No
a. Cut or tear about 4–6 in. (100–150 mm) of media from the roll.
b. Peel a label from the media strip.
c. Use this label to attach the end of the ribbon to the media strip. The media
strip acts as a ribbon leader.
100 - 150 mm
To Next Page
Loading...