Printer Setup and Operation
Install the Printer Driver and Connect the Printer to the Computer—Serial or Parallel
84
P1095460-001 ZT510 User Guide 6/28/17
6. Click Install Printer.
You are prompted to select a printer type.
7. Select your printer model and resolution.
The model and resolution are on a part number sticker on the printer, usually located
below the media spindle. The information will be in the following format:
Part Number: XXXXXxY – xxxxxxxx
where
XXXXX = the printer model
Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi)
For example, in the part number ZT510x3 – xxxxxxxx
ZT510 indicates that the printer is a ZT510 model
3 indicates that the printhead resolution is 300 dpi
8. Click Next.
You are prompted for a printer name, the port to which the printer will be connected, and
the language for the program.
9. Change the printer name (if desired), and select the appropriate port and language.
To Next Page
Loading...