223
Routine Maintenance
Cleaning Schedule and Procedures
5/22/17 ZT600 Series™ User Guide P1088680-001
9. Using the swab from the Preventive Maintenance Kit (part number 47362), wipe along the
upper cutting surface (
1) and the cutter blade (2). In place of the Preventive Maintenance
Kit, you may use a clean swab dipped in 99.7% isopropyl alcohol. Allow the solvent to
evaporate.
8-f. Slide the cutter module to the left, and then reinstall the cutter mounting screw.
8-g. Continue with step 9.
To Next Page
Loading...