Disconnecting
1. Press .
2. Use to select
Exit
,
and press
.
3. Use to select
Yes
,
and press
.
4. Disconnect the cable from the computer or iOS device
and the
.
NOTE
• A Lightning to USB Camera Adapter is necessary to connect an
iOS device.
• The
cannot operate on USB bus power. Use the internal bat-
teries, the dedicated AC adapter or an external DC power supply
to power it.
• When the is used as an audio interface and the sampling
rate is set to 44.1/48 kHz, latency increases 2 ms. When latency
increases while monitoring sounds being recorded with a mic
in real-time, interference occurs between sound transmitted
through the air from the source and the delayed monitored sound,
possibly making accurate monitoring of the sounds difficult.
Using USB functions
Using as an audio interface (Audio Interface)
146
Using as an audio interface (Audio Interface) (continued)
To Next Page
Loading...
