Zoom F8n - Setting Fader;Knob Operation (Knob;Fader Mode)

Using an
154
Setting fader and knob operation (Knob/Fader Mode)
Setting fader and knob operation (Knob/Fader Mode)
How the faders and TRIM/PAN knobs operate when their positions differ from actual parameter values can be set.
1. Press .
2. Use to select USB , and
press
.
3. Use to select FRC-8 , and
press
.
4. Use to select Knob/Fader
Mode
, and press .
5. Use to select the
fader and knob operation, and
press
.
Setting value Explanation
Absolute
When a knob or fader is operated, the parameter value
will change to the value shown by that knob or fader.
Safety
When a knob or fader is operated, the parameter value
will not change until the knob or fader first matches that
value.
NOTE
The
headphone volume operation cannot be changed.
Using an