HINT
Phantom power is a function that supplies power to devices that
require an external power supply, including some condenser mics.
The standard power is +48V, but some devices can operate with
lower voltages.
NOTE
Do not use this function with a device that is not compatible with
phantom power. Doing so could damage the device.
1. Press .
2. Use to select
INPUT
,
and press
.
3. Use to select
Phantom
,
and press
.
▶ Continue to one of the following procedures.
Using phantom power . . . . . . . . . . . . . . . . . . . . . . . . . . . .P.91
Setting the voltage ...............................P.91
Disabling phantom power during playback . . . . . . . . . . .P.92
The can provide phantom power. The voltage can be set to +24V or +48V and it can be turned on/off for each input separately.
Input settings
Changing the phantom power settings (Phantom)
90
Changing the phantom power settings (Phantom)
To Next Page
Loading...
