Zoom F8n - Setting Input Source

Input settings
Setting the input source (Input Source)
80
Follow these procedures to set the input source of each track.
1. Press .
2. Use to select INPUT , and
press
.
3. Use to select Input
Source
, and press .
4. Use to select a track, and
press
.
Setting the input source (Input Source)
HINT
Select ALL to set all the tracks at the same time.
5. Use to select the input
source, and press
.
Setting value Explanation
Mic
Select this when connecting a mic or other equipment
with a low input level.
Line
Select this when connecting line level equipment.
The input level will be reduced 20 dB compared to
when "Mic" is selected.
USB 1, USB 2,
USB 3, USB 4
When Audio Out From USB (→ P.147) is set to On, com-
puter output signals are treated as input signals.
NOTE
• When a mic capsule is connected, the Input Source cannot be
changed for Inputs 1 and 2.
• When dual channel recording is enabled (→ P.33), the Input
Source cannot be changed for the dual channel recording tracks.