Preparations
Turning the power on and off
18
Turning the power on and off
Turning the power on
1. Press and hold briefly.
The LED will light.
NOTE
• The first time you turn the power on after purchase, you must
set the date/time (→ P. 19). You can also change this setting later.
• If “No Card!” appears on the display, confirm that an SD card is
inserted properly.
• If “Card Protected!” appears on the display, the SD card write-pro-
tection is enabled. Slide the lock switch on the SD card to disable
write-protection.
• If “Invalid Card!” appears on the display, the card is not format-
ted correctly. Format the card or use a different card. To format an
SD card, see P. 177.
Turning the power off
1. Press and hold briefly.
NOTE
Keep pressing it until the ZOOM logo appears on the LCD.
The will automatically turn off if it
is unused for 10 hours.
To keep the power on continuously until powered off, see "Dis-
abling the Automatic Power Saving function" on P.21 and set Auto
Power OFF to Off.
To Next Page
Loading...
