Zoom F8n - Using an FRC-8 Controller; Connecting the FRC-8 Controller

Using an
Using an as a controller (Connect)
152
1. Press .
2. Use to select USB ,
and press
.
3. Use to select FRC-8 ,
and press
.
4. Use to select Connect ,
and press
.
5. Use a USB cable to connect the and
the
.
6. Turn the power ON.
NOTE
When disconnecting the
, select "Disconnect" before
unplugging the USB cable.
Using an as a controller (Connect)
By connecting an to the , you can use it to adjust trim, fader and pan settings, for example.