Zoom F8n - Setting the Keys Held (Key Hold Target)

Various settings
Setting the keys held (Key Hold Target)
172
1. Press .
2. Use to select SYSTEM ,
and press
.
3. Use to select Key Hold
Target
, and press .
4. Use to select the keys
held, and press
.
HINT
You can select Track 1-8, PFL 1-8, Trim Knob 1–8, Slate Mic, Slate
Tone, Encoder, MENU, HP Volume, REW, STOP, FF, PLAY and REC.
5. Press .
HINT
• Even when hold is on for "STOP" and "Track1-8", you can press
+ to turn the hold function off.
• Operation using the and F8 Control is possible even
when the hold function is on.
Setting the keys held (Key Hold Target)
Use the hold function to prevent misoperation during recording. Press + to turn it on/off.
Follow these instructions to set which keys are disabled by the hold function.