Using an
Updating the firmware
159
F8n Multi Track Field Recorder
Using an
Updating the firmware
1. See "Using an as a controller" (→P.152), and
connect the
and the .
NOTE
Updating is not possible if the remaining battery or DC power sup-
ply charge is low. In this case, replace the batteries with new ones
or use a charged DC power supply.
2. Copy the update file to the root directory on an SD
card.
3. Load the SD card into the SD CARD 1 slot.
NOTE
If an SD card is loaded in the SD CARD 2 slot, eject it.
4. Press .
5. Use to select
USB
,
and press
.
6. Use to select
FRC-8
,
and press
.
▶ Continue to one of the following procedures.
Checking the firmware version ....................P.160
Updating the firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . P.160
You can check the firmware version and update it to the latest version.
The latest update file can be downloaded from the ZOOM website (www.zoom.co.jp).
Updating the firmware
To Next Page
Loading...
