Zoom F8n - Page 91

Setting the voltage
4. Use to select Voltage
(For All Inputs)
, and
press
.
5. Use to select the
voltage, and press
.
HINT
When using mics and other equipment that can operate with volt-
ages less than +48V, selecting +24V can reduce power consumption
by the
.
Using phantom power
4. Use to select On/Off ,
and press
.
5. Use to select the input,
and press
.
HINT
Select
ALL to set all inputs at the same time.
6. Use to select On ,
and press
.
NOTE
When a mic capsule is connected, phantom power is set to Off for
inputs 1/2.
Input settings
Changing the phantom power settings (Phantom)
91
F8n Multi Track Field Recorder