Zoom F8n - Page 96

4. Use to select the input
pair, and press
.
HINT
Select
ALL to set all input pairs at the same time.
5. Use to select MS Stereo
Link
, and press .
Setting value Explanation
Stereo Link When stereo-linked, inputs are handled normally.
MS Stereo Link
When stereo-linked, signals from a mid-side mic are con-
verted to ordinary stereo.
NOTE
• When
MS Stereo Link is selected, odd-numbered inputs are han-
dled as mid signals and even-numbered inputs as side signals.
• The MS Stereo Link setting is disabled if a ZOOM mic capsule
is connected that cannot have L/R signals routed individually to
inputs 1/2.
HINT
• Use
for each input to adjust the mid/side balance.
• The PFL screen allows you to adjust the side mic level for inputs
1/2 when a mid-side mic capsule is connected.
Input settings
Converting mid-side input to ordinary stereo (Stereo Link Mode)
96
Converting mid-side input to ordinary stereo (Stereo Link Mode) (continued)