ZyXEL Communications AMG1302-T11C - Page 104

Chapter 7 Wireless LAN
AMG1302-T11C User’s Guide
104
Figure 40 Network Setting > Wireless> Advanced
The following table describes the labels in this screen.
Table 29 Network Setting > Wireless> Advanced
LABEL DESCRIPTION
Fragmentation
Threshold
This is the maximum data fragment size that can be sent. Enter a value between 256 and
2346.
Preamble Select a preamble type from the drop-down list menu. Choices are Long or Short. See
the Appendix E on page 270 for more information.
802.11 Mode Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate with the
AMG1302-T11C.
Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate with the
AMG1302-T11C.
Select 802.11b+g to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN devices
to associate with the AMG1302-T11C. The transmission rate of your AMG1302-T11C might
be reduced.
Select 802.11n to allow only IEEE 802.11n compliant WLAN devices to associate with the
AMG1302-T11C.
Select 802.11g+n to allow either IEEE 802.11g or IEEE 802.11n compliant WLAN devices
to associate with the AMG1302-T11C. The transmission rate of your AMG1302-T11C might
be reduced.
Select 802.11b+g+n to allow IEEE 802.11b, IEEE 802.11g or IEEE802.11n compliant
WLAN devices to associate with the AMG1302-T11C. The transmission rate of your
AMG1302-T11C might be reduced.