ZyXEL Communications AMG1302-T11C - 19.3 The LAN Status Screen

Chapter 19 Traffic Status
AMG1302-T11C User’s Guide
192
19.3 The LAN Status Screen
Click System Monitor > Traffic Status > LAN to open the following screen. You can view the LAN
traffic statistics in this screen.
Figure 102 System Monitor > Traffic Status > LAN
The following table describes the fields in this screen.
Set Interval
Click this button to apply the new poll interval you entered in the Refresh Interval field.
Stop Click Stop to stop refreshing statistics.
Connected
Interface
This shows the name of the WAN interface that is currently connected.
Packets Sent
Data This indicates the number of transmitted packets on this interface.
Error This indicates the number of frames with errors transmitted on this interface.
TX Bytes This indicates the number of bytes transmitted on this interface.
Packets Received
Data This indicates the number of received packets on this interface.
Error This indicates the number of frames with errors received on this interface.
RX Bytes This indicates the number of bytes received on this interface.
Table 77 System Monitor > Traffic Status > WAN (continued)
LABEL DESCRIPTION
Table 78 System Monitor > Traffic Status > LAN
LABEL DESCRIPTION
Refresh
Interval(s)
Specify how often you want the AMG1302-T11C to update this screen.
Set Interval
Click this button to apply the new poll interval you entered in the Refresh Interval field.
Stop Click Stop to stop refreshing statistics.
Interface This shows the LAN or WLAN interface.