AMG1302-T11C User’s Guide
198
CHAPTER 22
System Settings
22.1 Overview
This chapter shows you how to configure system related settings, such as the inactivity timeout
interval.
22.1.1 What You Can Do in the System Settings Screens
•Use the System screen (Section 22.2 on page 198) to configure system settings.
22.2 The System Screen
Use this screen to configure the inactivity timeout interval and scheduling settings.
Click Maintenance > System to open the screen as shown.
Figure 107 Maintenance > System
The following table describes the labels in this screen.
Table 82 Maintenance > System
LABEL DESCRIPTION
Administrator
Inactivity Timer
Type how many seconds a management session (either via the web configurator) can be
left idle before the session times out and you have to log in again. Very long idle timeouts
may have security risks. A value of "0" means a management session never times out, no
matter how long it has been left idle (not recommended).
Schedule Reboot Select Enable to let the AMG1302-T11C automatically restart at the scheduled time.
Interval Select this option and specify the interval (in seconds) at which the AMG1302-T11C
automatically restarts.
Time Select this option to specify the time of the day in 24-hour format and select the day of
the week you want the AMG1302-T11C to automatically restart.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
