Chapter 15 Firewall
AMG1302-T11C User’s Guide
173
Figure 86 Security > Firewall > Rules: Edit: Edit Customized Services
The following table describes the labels in this screen.
15.4.3 Customized Service Add/Edit
Use this screen to add a customized rule or edit an existing rule. Click Add or the Edit icon next to
a rule number in the Firewall Customized Services screen to display the following screen.
Figure 87 Security > Firewall > Rules: Edit: Edit Customized Services: Add/Edit
Table 65 Security > Firewall > Rules: Edit: Edit Customized Services
LABEL DESCRIPTION
# This is the number of your customized port.
Name This is the name of your customized service.
Protocol This shows the IP protocol (TCP or UDP) that defines your customized service.
Port Type This is the port number or range that defines your customized service.
Start Port This is a single port number or the starting port number of a range that defines your
customized service.
End Port This is a single port number or the ending port number of a range that defines your customized
service.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to remove an existing rule.
Add Click this to configure a customized service.
OK Click this to save your changes and return to the Firewall Edit Rule screen.
To Next Page
Loading...
