Chapter 4 Tutorials
AMG1302-T11C User’s Guide
58
This maps e-mail traffic to queue 1 created in the previous screen (see the Source Port Range
field). This also maps your computer’s MAC address to queue 1 (see the Source MAC Address
field).
4.11 Access the AMG1302-T11C from the Internet Using
DDNS
If you connect your AMG1302-T11C to the Internet and it uses a dynamic WAN IP address, it is
inconvenient for you to manage the device from the Internet. The AMG1302-T11C’s WAN IP address
changes dynamically. Dynamic DNS (DDNS) allows you to access the AMG1302-T11C using a
domain name.
To use this feature, you have to apply for DDNS service at www.dyndns.org.
This tutorial shows you how to:
• Registering a DDNS Account on www.dyndns.org
• Configuring DDNS on Your AMG1302-T11C
• Testing the DDNS Setting
Note: If you have a private WAN IP address, then you cannot use DDNS.
4.11.1 Registering a DDNS Account on www.dyndns.org
1 Open a browser and type http://www.dyndns.org.
2 Apply for a user account. This tutorial uses UserName1 and 12345 as the username and
password.
Interface Select From LAN.
To Queue Link this to a queue created in the Network Setting > QoS > Queue
Setup screen, which is the 1 queue created in this example.
Source MAC Address Type the MAC address of your computer - AA:FF:AA:FF:AA:FF. Type the
Source Mac Netmask if you know it.
Source Port Range Enter the port number to which the rule should be applied - 25 for SMTP.
Protocol ID Select the IP protocol type - TCP.
w.x.y.z
a.b.c.d
http://zyxelrouter.dyndns.org
A
To Next Page
Loading...
