AMG1302-T11C User’s Guide
217
CHAPTER 28
Diagnostic
28.1 Overview
These read-only screens display information to help you identify problems with the AMG1302-T11C.
28.1.1 What You Can Do in the Diagnostic Screens
•Use the Ping screen (Section 28.2 on page 217) to ping an IP address.
•Use the DSL Line screen (Section 28.3 on page 218) to view the DSL line statistics and reset the
ADSL line.
28.2 The General Screen
Use this screen to ping an IP address. Click Maintenance > Diagnostic > Ping to open the screen
shown next.
Figure 126 Maintenance > Diagnostic > Ping
The following table describes the fields in this screen.
Table 91 Maintenance > Diagnostic > Ping
LABEL DESCRIPTION
Type the IP address of a computer that you want to ping in order to test a connection.
Ping Click this to ping the IPv4 address that you entered.
PingV6 Click this to ping the IPv6 address that you entered.
To Next Page
Loading...
