ZyXEL Communications AMG1302-T11C - CHAPTER 20 User Account

AMG1302-T11C User’s Guide
194
CHAPTER 20
User Account
20.1 Overview
You can configure system password for the admin account in the User Account screen.
20.2 The User Account Screen
Use the User Account screen to configure system password.
Click Maintenance > User Account to open the following screen.
Figure 104 Maintenance > User Account
The following table describes the labels in this screen.
Table 80 Maintenance > User Account
LABEL DESCRIPTION
User Name You can configure the password for the Admin account.
Old Password Type the default password or the existing password you use to access the system in this
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays a (*) for each character you type. After you change the password, use
the new password to access the AMG1302-T11C.
Retype to
Confirm
Type the new password again for confirmation.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.