AMG1302-T11C User’s Guide
220
CHAPTER 29
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• AMG1302-T11C Access and Login
• Internet Access
29.1 Power, Hardware Connections, and LEDs
The AMG1302-T11C does not turn on. None of the LEDs turn on.
1 Make sure the AMG1302-T11C is turned on.
2 Make sure you are using the power adaptor or cord included with the AMG1302-T11C.
3 Make sure the power adaptor or cord is connected to the AMG1302-T11C and plugged in to an
appropriate power source. Make sure the power source is turned on.
4 Turn the AMG1302-T11C off and on.
5 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. Section 1.5 on page 15
2 Check the hardware connections.
3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
LABEL DESCRIPTION
WPS LED Green: successful connection
Off: connection failure
WLAN LED Green: Wi-Fi active
Off: Wi-Fi inactive
To Next Page
Loading...
