AMG1302-T11C User’s Guide
210
CHAPTER 27
Remote Management
27.1 Overview
Remote management allows you to determine which services/protocols can access which
AMG1302-T11C interface (if any) from which computers.
The following figure shows remote management of the AMG1302-T11C coming in from the WAN.
Figure 119 Remote Management From the WAN
Note: When you configure remote management to allow management from the WAN, you
still need to configure a IP filter rule to allow access.
You may manage your AMG1302-T11C from a remote location via:
• Internet (WAN only)
•LAN only
•LAN and WAN
• None (Disable)
To disable remote management of a service, select Disable in the corresponding Service Access
field.
27.1.1 What You Can Do in the Remote Management Screens
•Use the Remote MGMT screen (Section 27.2 on page 211) to configure through which
interface(s), which services can access the AMG1302-T11C.
• Your AMG1302-T11C can act as an SNMP agent, which allows a manager station to manage and
monitor the AMG1302-T11C through the network. Use the SNMP screen (Section 27.3 on page
212) to change your SNMP settings.
To Next Page
Loading...
