Chapter 4 Tutorials
AMG1302-T11C User’s Guide
45
Tutorial: NAT Port Forwarding Setup
4.6.1 Port Forwarding
Thomas needs to configure the port settings and IP address on the AMG1302-T11C. Traffic should
be forwarded to port 666 of the Doom server computer which has an IP address of 192.168.1.34.
Thomas may set up the port settings by configuring the port settings for the Doom server computer
(see Section 11.3 on page 150 for more information).
1 Activate NAT in the Network Setting > NAT > General screen. Click Apply.
2 Click Network Setting > NAT > Port Forwarding. Select PVC0 as the WAN interface and click
Add new rule.
3 Configure the screen with the following values:
The screen should look as follows. Click Apply.
D=192.168.1.34
WAN
LAN
port 666
A
Service Name Select User Define.
Start/End Ports Enter 666 as the Start and End port.
Server IP Address Enter the IP address of the Doom server (192.168.1.34 for this example).
To Next Page
Loading...
