Chapter 17 Certificate
AMG1302-T11C User’s Guide
186
17.4 The Trusted CA Screen
Use this screen to view a summary list of certificates of the certification authorities that you have
set the AMG1302-T11C to accept as trusted. The AMG1302-T11C accepts any valid certificate
signed by a certification authority on this list as being trustworthy; thus you do not need to import
any certificate that is signed by one of these certification authorities.
Click Security > Certificates > Trusted CA to open the Trusted CA screen.
Figure 97 Security > Certificates > Trusted CA
SSH Type in the location of the SSH certificate file you want to upload in this field or click
Browse to find it.
Current File This field displays the name used to identify this certificate. It is recommended that you
give each certificate a unique name.
Key Type This field applies to the SSH certificate.
This shows the file format of the current certificate.
Client Certificate Type in the location of the certificate or click Browse... to find the certificate file you want
to upload.
Private Key is
protected by a
password
Select this option and enter the private key into the text box to store it on the AMG1302-
T11C. The private key should not exceed 63 ASCII characters (not including spaces).
Current File This field displays the name used to identify this certificate.
Subject This field displays identifying information about the certificate’s issuing certification
authority, such as a common name, organizational unit or department, organization or
company and country.
Issuer This field displays identifying information about the certificate’s issuing certification
authority, such as a common name, organizational unit or department, organization or
company and country.
Valid From This field displays the date that the certificate becomes applicable.
Valid To This field displays the date that the certificate expires. The text displays in red and
includes an Expiring! or Expired! message if the certificate is about to expire or has
already expired.
Cert Click this button and then Save in the File Download screen. The Save As screen
opens, browse to the location that you want to use and click Save.
Replace Click this to replace the certificate(s) and save your changes back to the AMG1302-T11C.
Reset Click this to clear your settings.
Table 71 Security > Certificates > Local Certificates (continued)
LABEL DESCRIPTION
To Next Page
Loading...
