Chapter 27 Remote Management
AMG1302-T11C User’s Guide
213
An SNMP managed network consists of two main types of component: agents and a manager.
An agent is a management software module that resides in a managed device (the AMG1302-
T11C). An agent translates the local management information from the managed device into a form
compatible with SNMP. The manager is the console through which network administrators perform
network management functions. It executes applications that control and monitor managed
devices.
The managed devices contain object variables/managed objects that define each piece of
information to be collected about a device. Examples of variables include such as number of
packets received, node port status etc. A Management Information Base (MIB) is a collection of
managed objects. SNMP allows a manager and agents to communicate for the purpose of accessing
these objects.
27.3.1 Configuring SNMP
To change your AMG1302-T11C’s SNMP settings, click Maintenance > RemoteMGMT > SNMP.
The screen appears as shown.
Figure 122 Maintenance > RemoteMGMT > SNMP
The following table describes the labels in this screen.
Table 88 Maintenance > RemoteMGMT > SNMP
LABEL DESCRIPTION
SNMP Setup
SNMPv3 Select Enable to allow SNMP managers using SNMPv3 to access the AMG1302-T11C.
To Next Page
Loading...
