Chapter 4 Tutorials
AMG1302-T11C User’s Guide
35
4.3 IPv6 Address Configuration
If the ISP’s network supports IPv6, the ISP may assign an IPv6 address to the AMG1302-T11C
automatically.
In the Network Setting > Broadband screen’s IPv6 Address configuration section, select
Obtain an IP Address Automatically. In the DHCP IPv6 field select DHCP to obtain an IPv6
address from a DHCPv6 server. In the DHCP PD field select Enable to have the AMG1302-T11C
pass the WAN prefix to LAN hosts. The LAN hosts can then use the prefix to generate their IPv6
addresses.
4.4 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet.
In this wireless network, the AMG1302-T11C serves as an access point (AP), and the notebook is
the wireless client. The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the AMG1302-T11C. Then he can set up
a wireless network using WPS (Section 4.4.2 on page 37) or manual configuration (Section 4.4.3 on
page 41).
To Next Page
Loading...
