Chapter 7 Wireless LAN
AMG1302-T11C User’s Guide
103
7.8.1 Scheduling Rule Add/Edit
Use this screen to set the times your wireless LAN is turned off. To open this screen, click the Add
New Rule button or an existing rule’s Edit icon in the Network Setting > Wireless >
Scheduling screen.
Figure 39 Network Setting > Wireless > Scheduling: Add New Rule/Edit
The following table describes the fields in this screen.
7.9 The Advanced Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Advanced, the screen appears as shown.
See Section 7.10.2 on page 107 for detailed definitions of the terms listed in this screen.
Modify Click Edit to configure the rule.
Clcik Delete to remove the rule.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 27 Network Setting > Wireless > Scheduling
LABEL DESCRIPTION
Table 28 Network Setting > Wireless > Scheduling: Add New Rule/Edit
LABEL DESCRIPTION
Rule Name Enter a descriptive name for identification purposes. You can enter up to 15
alphanumeric characters. Spaces are not allowed, but dashes “-”and underscores “_”
are accepted.
Day Check which day(s) of the week you want to turn the wireless LAN off.
Time of Day Range Specify a time frame during which the schedule would apply.
For example, if you set the time range from 12:00 to 23:00, the wireless LAN will be
turned off only during this time period.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
