ZyXEL Communications AMG1302-T11C - 19.4 The NAT Screen

Chapter 19 Traffic Status
AMG1302-T11C User’s Guide
193
19.4 The NAT Screen
Click System Monitor > Traffic Status > NAT to open the following screen. You can view the NAT
status of the AMG1302-T11C’s client(s) in this screen.
Figure 103 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Bytes Sent This indicates the number of bytes transmitted on this interface.
Bytes Received This indicates the number of bytes received on this interface.
Interface This shows the LAN or WLAN interface.
Sent (Packet)
Data This indicates the number of transmitted packets on this interface.
Error This indicates the number of frames with errors transmitted on this interface.
Drop This indicates the number of outgoing packets dropped on this interface.
Received (Packet)
Data This indicates the number of received packets on this interface.
Error This indicates the number of frames with errors received on this interface.
Drop This indicates the number of received packets dropped on this interface.
Table 78 System Monitor > Traffic Status > LAN (continued)
LABEL DESCRIPTION
Table 79 System Monitor > Traffic Status > NAT
LABEL DESCRIPTION
Refresh Interval Specify how often you want the AMG1302-T11C to update this screen.
Set Interval
Click this button to apply the new poll interval you entered in the Refresh Interval field.
Stop Click Stop to stop refreshing statistics.
Device Name This shows the name of the client.
IP Address This shows the IP address of the client.
MAC Address This shows the MAC address of the client.
No. of Open
Session
This shows the number of NAT sessions used by the client.