Chapter 6 Broadband
AMG1302-T11C User’s Guide
77
6.3.1 More Connections Edit
Use this screen to configure a connection. Click the edit icon in the More Connections screen to
display the following screen.
Active This field indicates whether the connection is active or not.
Clear the check box to disable the connection. Select the check box to enable it.
Node Name This is the name you gave to the Internet connection.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)
numbers configured for this WAN connection.
Encapsulation This field indicates the encapsulation method of the Internet connection.
Default Route
Enable
This field displays whether the AMG1302-T11C use the WAN interface of this connection
as the system default gateway.
Modify The first (ISP) connection is read-only in this screen. Use the Broadband > Internet
Connection screen to edit it.
Click the Edit icon to edit the Internet connection settings. Click this icon on an empty
configuration to add a new Internet access setup.
Click the Delete icon to remove the WAN connection from your connection list.
Table 13 Network Setting > Broadband > More Connections (continued)
LABEL DESCRIPTION
To Next Page
Loading...
