Chapter 6 Broadband
AMG1302-T11C User’s Guide
78
Figure 23 Network Setting > Broadband > More Connections: Edit
The following table describes the labels in this screen.
Table 14 Network Setting > Broadband > More Connections: Edit
LABEL DESCRIPTION
General
Active Select the check box to activate or clear the check box to deactivate this connection.
Node Name Enter a unique, descriptive name of up to 13 ASCII characters for this connection.
Mode Select Router from the drop-down list box if your ISP allows multiple computers to share
an Internet account.
If you select Bridge, the AMG1302-T11C will forward any packet that it does not route to
this remote node; otherwise, the packets are discarded.
To Next Page
Loading...
