Chapter 7 Wireless LAN
AMG1302-T11C User’s Guide
95
The following table describes the labels in this screen.
7.3.1 More/guest AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More/guest AP
screen. The following screen displays.
Figure 32 Network Setting > Wireless > More/guest AP: Edit
The following table describes the fields in this screen.
Table 20 Network Setting > Wireless > More/guest AP
LABEL DESCRIPTION
# This is the index number of each SSID profile.
Active This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active. A
gray bulb signifies that this SSID is not active.
SSID An SSID profile is the set of parameters relating to one of the AMG1302-T11C’s BSSs. The SSID
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans for
an AP to associate with, this is the name that is broadcast and seen in the wireless client utility.
Security This field indicates the security mode of the SSID profile.
Modify Click the Edit icon to configure the SSID profile.
Table 21 Network Setting > Wireless > More/guest AP: Edit
LABEL DESCRIPTION
Wireless Network Setup
Wireless Select Enable Wireless LAN to activate wireless LAN.
Wireless Network Settings
To Next Page
Loading...
